login   |    register

In-Box Review
Wheels for the 2 1/2 ton truck
Wheels7.5-20 (N.D.T.) Tread Pattern
  • move

by: Rick Cooper [ CLOVIS899 ]

Originally published on:


Your Scale Model Kits from Ukraine has recently begun producing a few resin replacement parts for modelers. Their first release is a set of resin non-directional tread wheels for U.S., and Lend Lease, 2 1/2 ton trucks.

the wheels

The replacement wheels, size 7.5-20, come packaged in a small 6 x 3.5 inch zip lock bag. The set consists of 12 wheels, so enough for the spare and an extra just in case. You also get six hubs for your wheels, four for the dual rear axle and a pair for the front. The set is a bit of an oddity in that the 12 tires are not the same manufacturer; you get six Goodyear and six Firestone, non-directional tread tires in the bag. With six of each you can place all of one or the other on the outside station for a uniform look. If you would like a more lived in look you can mix and match, I donít think anyone much cared about consistency of manufacturer while in the field.

The wheels all have a bit of flash to remove as well as the normal clean-up at the mold seam and the pour plugs. Putting the wheels together with the hubs requires a bit of work to get a nice square join, the bolt detail needs to be removed from the inside, outside or both, depending on which wheel station you are working on. Removing the bolts from the inner face is a bit tricky to get a nice even surface for your CA glue to work with. Also, the hubs require some drilling out in order to fit on to the axle stub. You can use these wheels for lots of different kits so make sure you know what you need before you start drilling.


I donít see any real issues with this replacement set of wheels. If you are a fan of the resin wheels from Hussar Productions these will look very similar; perhaps just a bit rougher but still similar. If you are looking to replace and upgrade the wheels on a Studebaker or GMC and donít want to deal with the seam on rubber tires these could be the way to go.
Highs: Fine sidewall detail, resin replacement wheels means no more tricky rubber seam clean-up.
Lows: A bit tricky to clean out the inner wheel for a good, positive mating surface. You will have to drill out the hub to attach to the axle.
Verdict: A decent first offering from a small manufacturer.
Percentage Rating
  Scale: 1:35
  Mfg. ID: DS35001
  Suggested Retail: Unknwn
  Related Link: 
  PUBLISHED: Jul 07, 2012
  NATIONALITY: United States

Our Thanks to Your Scale!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Rick Cooper (clovis899)

I have been modeling for about 30 years now. Once upon a time in another century I owned my own hobby shop; way more work than it was worth. I tip my opti-visor to those who make a real living at it. Mainly build armor these days but I keep working at figures, planes and the occasional ship.

Copyright ©2021 text by Rick Cooper [ CLOVIS899 ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of ModelGeek. All rights reserved.


I wish I had seen this review back when it first came out. Nice set of wheels does this company exist any more. Dave M
MAR 16, 2015 - 07:55 AM
Seems to exist at least : LINK
MAR 16, 2015 - 01:02 PM
Thanks for the information. I have seen these wheels what threw me was their use on the Studebaker US6. Thanks again Dave M
MAR 17, 2015 - 07:15 AM

What's Your Opinion?

Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move